Re: [ros-users] ni setup.bash issue

Hi Miguel,

We have specifically chosen to have setup.(ba)sh files use the current
environment. This ended up being a constant source of confusion due to the
fact that if you were using one environment and then "changed" to another
you might still have remnants of the old one on your path. And then if you
created a new terminal it would not have the remnants and would behave
differently.

It is recommended that you setup rosinstall to contain your whole desired
tree and then it will generate your setup.(ba)sh You can use the "other" tag
to add arbitrary paths to your rosinstall file.
http://www.ros.org/wiki/rosinstall

Tully

On Wed, Feb 23, 2011 at 1:23 AM, Miguel Prada Sarasola <
miguel.prada.sarasola@gmail.com> wrote:

> I just found another issue with how this setup file works.
>
> I upgraded from cturtle to diamondback, and as I source the setup.sh in the
> ni stack _after_ sourcing the setup.sh in diamondback, the setup file in the
> ni stack overwrites the package path, removing the diamondback directory and
> including the cturtle one. I now this can be easily fixed (by rerunning
> rosinstall if I'm not mistaken, or even manually fixing the setup file), but
> it wouldn't be necessary if the setup file did append the ni stack dir to
> $ROS_PACKAGE_PATH instead of a hardcoded value that's created by rosinstall.
>
> Regards,
> Miguel.
>
> El 22/02/2011, a las 12:46, Miguel Prada escribió:
>
> > Hi all,
> >
> > I just realised about a potential pitfall in how the setup.sh file in
> > the ni stack works. Sorry if this has already been brought to
> > attention, but I couldn't find any reference.
> >
> > I've seen that the setup.sh file inside the ni stack writes the
> > ROS_PACKAGE_PATH with the path of ni and the path where ros is
> > installed (e.g. /opt/ros/diamondback). The thing is that if I have
> > added some extra folders to the ROS_PACKAGE_PATH in my .bashrc before
> > sourcing the setup.sh in ni stack, it will erase those extra folders.
> >
> > For example, if my .bashrc has:
> >
> > source /opt/ros/diamondback/setup.bash
> > export ROS_PACKAGE_PATH=/my/additional/ros/stacks:$ROS_PACKAGE_PATH
> > source ~/ni/setup.bash
> >
> > Then /my/additional/ros/stacks will not be part of the environment
> > variable, and thus my packages won't be found by ROS.
> >
> > Wouldn't it be better if the setup.sh in the ni stack would prepend
> > the ni stack folder to $ROS_PACKAGE_PATH instead of
> > /opt/ros/diamondback? Or am I doing something wrong?
> >
> > Regards,
> > Miguel.
>
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>



--
Tully Foote
Systems Engineer
Willow Garage, Inc.
tfoote@willowgarage.com
(650) 475-2827