Hi, I am sorry about my last message I know I wasn't as much specific as I
should be, now I will try to explain it better.
We have the bumbblebee XB3 BBX3-13S2C connected by firewire on a debian
squeeze box with ros installed using diamondback. I would like to obtain 3D
information (point cloud, stereo image and disparity map) using this
camera .
I have seen that the package ''bumblebee2'' provides the left and rigth
images and the disparity image, and the "bumblebee_stereo" package computes
disparity and point cloud from a pair of stereo images so I have tried them
both.
when I use coriander it works correctly. I have also installed camera1394
package, I type rosrun camera1394 camera1394_node and in other console I
type rosrun image_view image_view image:=camera/image_mono and it shows a
mono image obtained by the cam.
Everything is going ok until this moment, but the problems start when I try
the next packages:
bumblebee2 package
I type roslaunch bumblebee2 Bumblebee2.launch and I obtain this:
[error][1310052718.389426286]:segmentation fault, stopping camera.
segmentation fault stopping camera driver.
but this error appears several times and does not stop by itself
bumblebee_stereo package
by the other side I have installed the bumblebee_stereo package but when I
type roslaunch bumblebee_stereo bumblebee_stereo.launch I obtain this:
Checking log directory for disk usage. This may take awhile.
Press Ctrl-C to interrupt
Done checking log file disk usage. Usage is <1GB.
started roslaunch server
http://sonar:53437/
SUMMARY
========
PARAMETERS
* /bumblebee_stereo/stereo_height
* /bumblebee/frame_id
* /rosdistro
* /bumblebee/exposure
* /bumblebee/calibration_path
* /bumblebee/video_mode
* /bumblebee_stereo/do_rectify
* /bumblebee_stereo/calibration_path
* /bumblebee/brightness
* /bumblebee/gain_auto
* /bumblebee/exposure_auto
* /bumblebee/brightness_auto
* /rosversion
* /bumblebee_stereo/do_keep_coords
* /bumblebee_stereo/do_stereo
* /bumblebee_stereo/stereo_width
* /bumblebee/gain
* /bumblebee/fps
* /bumblebee/videre_mode
* /bumblebee_stereo/do_calc_points
NODES
/
bumblebee (bumblebee1394/bumblebee1394)
bumblebee_stereo (bumblebee_stereo/bumblebee)
ROS_MASTER_URI=
http://localhost:11311
core service [/rosout] found
process[bumblebee-1]: started with pid [3319]
process[bumblebee_stereo-2]: started with pid [3320]
[ INFO] [1310053198.109936223]: I'm keeping the image coordinates in the
point cloud
libdc1394 error: Generic failure: in dc1394_video_set_transmission
(control.c, line 953): Could not stop ISO transmission
libdc1394 warning: iso allocation not implemented yet for juju drivers,
using channel 0...
[ INFO] [1310053199.442858529]: Serial no: 8251014
[ INFO] [1310053199.443020916]: Writing calibration to file:
/srv/ros/bumblebee_stereo/config/8251014.cal
[ INFO] [1310053199.443835866]: Initialize triclops context from:
/srv/ros/bumblebee_stereo/config/8251014.cal
Do I have forgotten something that makes that the packages don't work?
what can i do?
Thanks in advance.
*******************
El , Nutan Chen <
ntchen86@gmail.com> escribió:
> This problem?
> http://answers.ros.org/question/1096/segmentation-fault-of-bumblebee2
> On 7 July 2011 01:38, Tully Foote tfoote@willowgarage.com> wrote:
> When asking questions please follow the guidelines at
> http://www.ros.org/wiki/Support#Guidelines_for_asking_a_question You're
> not providing enough information for us to be able to help you
> effectively. Especially when you state there are "Errors" you should cut
> and paste the errors and tell us how to reproduce them. Also as Jack
> mentioned the right forum for this question is answers.ros.org. Please
> ask it there with more details.
> Tully
> On Wed, Jul 6, 2011 at 9:09 AM, dianabel81@gmail.com> wrote:
> Yeah i have tried that, but it is not working
> El , Medi-Care Robotics itsmyrobot@gmail.com> escribió:
> > Have you tried :
> >
> >
> >
> > Rosrun image_view image_view
> >
> >
> >
> > In a terminal?
> >
> >
> >
> >
> >
> >
> >
> > Op 6 jul. 2011 om 15:32 heeft dianabel81@gmail.com het volgende
> geschreven:
> >
> >
> >
> > > Hi, i have installed the package bumblebe_stereo, the roslaunch works
> correctly, but what do I have to do after that, i have tried to use
> image_view but i can not see anything, it shows an error.
> >
> > >
> >
> > > Any advice? thanks in advance
> >
> > > _______________________________________________
> >
> > > ros-users mailing list
> >
> > > ros-users@code.ros.org
> >
> > > https://code.ros.org/mailman/listinfo/ros-users
> >
> > _______________________________________________
> >
> > ros-users mailing list
> >
> > ros-users@code.ros.org
> >
> > https://code.ros.org/mailman/listinfo/ros-users
> >
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
> --
> Tully Foote
> Systems Engineer
> Willow Garage, Inc.
> tfoote@willowgarage.com
> (650) 475-2827
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
(text/plain)