Re: [ros-users] rviz is moving to Qt, preview available

I have one problem here. When I try to compile rosgui_rviz by

> rosmake --rosdep-install rosgui_rviz
>

I always get:

> rosdep install failed: Failed to load a rdmanifest from
> https://kforge.ros.org/rosrelease/viewvc/sourcedeps/nvidia-cg/nvidia-cg-3.0_February2011.rdmanifest,
> and no alternate URI given
>

I have rviz_qt installed before. But now if I try to install it again, I
will get the same problem:

> rosdep install failed: Failed to load a rdmanifest from
> https://kforge.ros.org/rosrelease/viewvc/sourcedeps/nvidia-cg/nvidia-cg-3.0_February2011.rdmanifest,
> and no alternate URI given
>

However we do have
https://kforge.ros.org/rosrelease/viewvc/sourcedeps/nvidia-cg/nvidia-cg-3.0_February2011.rdmanifest.


On Tue, Dec 20, 2011 at 7:03 PM, Dirk Thomas <mail@dirk-thomas.net> wrote:

> If I want to contribute a matplotlib plugin, shall I wait for your Python
>> API? I have successfully installed rviz_qt on OS X 10.6, but not original
>> rviz. Most of the errors are from wx, and I'm not
>> going to waste my time on installing old wx GUI tools. However I really
>> need rxplot at the moment.
>>
>
> If you want rxplot-like functionality without wxWidgets you might want to
> try the newly developed ROS GUI.
> I can't promise anything for OS X, but if there are problems I suspect
> them to be fixed fast.
>
> For more information see:
> - the SIG "ROS GUI": http://www.ros.org/wiki/**fuerte/Planning/ROS%20GUI<http://www.ros.org/wiki/fuerte/Planning/ROS%20GUI>
> - posts on the mailing list: https://code.ros.org/lurker/**
> message/20111022.152853.**6ab39e40.en.html<https://code.ros.org/lurker/message/20111022.152853.6ab39e40.en.html>
>
> Dirk
>
> ______________________________**_________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/**listinfo/ros-users<https://code.ros.org/mailman/listinfo/ros-users>
>