Thanks Tully,
If you have a pointer to some information on that project I'd like to look at it.
In the spirit of simply taking a shoe horn to roscpp, I spent a little bit of time looking at the roscpp source, it wasn't clear just from grep'ing the #include's if there are a lot of kernel dependencies. OTOH, I can certainly imagine a lot of dynamic memory allocation going on, which can be painful on a system without virtual memory and only a limited amount of SRAM to start with.
-dave
On Sep 12, 2012, at 2:22 PM, Tully Foote wrote:
> Hi Dave,
>
> To answer your question directly I have seen a proof of concept with roscpp running on a bare metal arm chip. I don't know exactly what went into making that work.
>
> Morgan,
>
> Thanks for taking the initiative to setup the SIG. I've created a wiki page for the SIG at http://www.ros.org/wiki/SIG/Embedded
>
> Tully
>
> On Wed, Sep 12, 2012 at 1:56 PM, blackstag <blackstag@gmail.com> wrote:
> Hah ok will tell Paul to spell right. Is Ros serial using sockets for small embedded linux processors. It was implemented on the Vex Pro and Chumby in our testing.
>
>
> On Wed, Sep 12, 2012 at 2:58 PM, Dave Curtis <dave@dave-curtis.com> wrote:
> OK, so I see the rosserial_embeddedlinux package supports TCP, I didn't see that before. But it does say "imbedded Linux", which is still considerably different from an MMU-less uCtlr. So, is rosserial_embeddedlinux more light weight than its name would imply?
>
> -dave
>
> On Sep 12, 2012, at 11:43 AM, blackstag wrote:
>
> > Ros serial does have a TCP option now for wifi or ethernet.
> >
> > On Wed, Sep 12, 2012 at 1:14 PM, Dave Curtis <dave@dave-curtis.com> wrote:
> > I've been searching the archives for info on this topic but everything I turn up is pretty ancient.
> >
> > Suppose you have an embedded device that has an ethernet controller and enough oomph to run a TCP stack and an RTOS, for instance an ARM Cortex-M3. Is it possible to run roscpp on the bare metal, or does roscpp depend on a lot of Linux system services? Of course, rosserial would be an option, but if you have an ethernet controller on chip, that seems limiting. Or is there another light-weight ROS comms on TCP that I don't know about?
> >
> > -dave
> >
> > _______________________________________________
> > ros-users mailing list
> > ros-users@code.ros.org
> > https://code.ros.org/mailman/listinfo/ros-users
> >
> > _______________________________________________
> > ros-users mailing list
> > ros-users@code.ros.org
> > https://code.ros.org/mailman/listinfo/ros-users
>
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>
>
>
> --
> Tully Foote
> tfoote@willowgarage.com
> (650) 475-2827
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
(text/plain)