Hello Mister Eich.
Thans for your fast reply.
I used to use Buildroot because I thought it was easiest to use and
configure than Yocto. As far as I know, Buildroot is used for build static
rootfs (for now, this is just what I need) while Yocto is used for more
dynamics Distributions rather than static filesystems.
Anyway, I was thinking about trying and maybe moving to Yocto some time
ago, and I think this might be a good time for do it.
Thanks for all.
Sincerely, Javier
2014-05-27 12:46 GMT+02:00 Dr. Markus Eich <
markus.eich@dfki.de>:
> Dear Javier,
>
> I would recommend to use the Yocto Project http://www.yoctoproject.org/and bitbake for cross compiling. There exists even some meta-packages for
> this.
>
> https://github.com/bmwcarit/meta-ros
>
> This runs very nicely and is relatively easy to configure. It is build on
> ROS Hydro. I would migrate to Hydro anyway, because Fuerte is EOL.
>
>
> I am working with Yocto/Dora branch and ROS, using the meta-ros packages.
>
>
> Cheers,
>
> Markus
>
>
>
>
> Am 27.05.2014 12:13, schrieb Javier Almansa:
>
> Hello everybody. My name is Javier and I am new in this mailing list.
>
> I work with embedded systems (bare metal programming and embedded
> GNU/Linux too) and I am learning ROS by my own at home.
>
> some months ago I wrote an entry in my personal blog (
> http://industriaembebidahoy.com/efsystems/es/node/61) about how to
> cross-compile ROS Fuerte for a RPI Board with a with a BuildRoot based
> rootfs (http://buildroot.uclibc.org/) based on other post I found in
> Internet (http://uchile-spl.wikidot.com/).
>
> Now, Im trying to add support for ROS in Buildroot for automatic
> cross-compile of ROS in new rootfs for any architecture supported for
> Buildroot.
>
> I have used rosinstall-generator to obtain a list of packages for a
> ros-base groovy instalation whith the idea of add all this packages into a
> virtual package in BuildRoot, but I have some troubles when I try to
> cross-compile.
>
> My problem is the dependencies among packages, so I would like to know
> if anyone could tell me which is the correct order for compile and install
> separate packages without dependencies problems so I could configure
> Buildroot for doing the compilation in the correct order.
>
> Also, I think that not all packages are needed for a running system, so
> I would like to know which packages I could omit for an embedded system (I
> will not develop in this system, only run).
>
> Anyone could help me?
>
> Thanks in advance.
>
> Javier.
>
>
> _______________________________________________
> ros-users mailing listros-users@lists.ros.orghttp://lists.ros.org/mailman/listinfo/ros-users
>
>
> --
> Dr.-Ing. Markus Eich
>
> Senior Researcher
> Marine Inspection Robotics
> Space Robotics
>
> Besuchsadresse der Nebengeschäftstelle:
> DFKI GmbH
> Robotics Innovation Center
> Robert-Hooke-Straße 5
> 28359 Bremen, Germany
>
> Postadresse der Hauptgeschäftsstelle Standort Bremen:
> DFKI GmbH
> Robotics Innovation Center
> Robert-Hooke-Straße 1
> 28359 Bremen, Germany
>
> Tel.: +49 421 178 45-4105
> Zentrale: +49 421 178 45-0
> Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
> E-Mail: markus.eich@dfki.de
>
> Weitere Informationen: http://www.dfki.de/robotik
> -----------------------------------------------------------------------
> Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
> Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
> Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
> (Vorsitzender) Dr. Walter Olthoff
> Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
> Amtsgericht Kaiserslautern, HRB 2313
> Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
> USt-Id.Nr.: DE 148646973
> Steuernummer: 19/673/0060/3
> -----------------------------------------------------------------------
>
>
> _______________________________________________
> ros-users mailing list
> ros-users@lists.ros.org
> http://lists.ros.org/mailman/listinfo/ros-users
>
>
_______________________________________________
ros-users mailing list
ros-users@lists.ros.org
http://lists.ros.org/mailman/listinfo/ros-users
(text/plain)