Re: [ros-users] Control - From simulation to real-world

I know this is a late response, but I wrote an extensive tutorial on PID
tuning of a double inverted pendulum in Gazebo during my internship at OSRF:
http://gazebosim.org/tutorials/?tut=ros_control

However, the overlap and transferal between simulation and real-world is
entirely dependent on your model fidelity and simulation engine - I doubt
it will be very similar.

- dave

On Fri, Oct 9, 2015 at 12:12 PM, Bobby via ros-users <
ros-users@lists.ros.org> wrote:

> Hello,
>
> Does anyone have any recommendations on the development process for tuning
> a PID in simulation versus in reality, and what the process might look like
> in transferral between the two?
>
> The current project is an inverted pendulum, and while I've got the
> hardware lined out, specs included, I don't want to destroy my equipment
> trying to tune the PID. If there's a way that I could do this with a
> simulation, and then migrate the algorithms/tunings over, that would be
> very helpful in terms of time and expenses.
>
> I do understand though that simulation and realworld aren't 1:1, and so it
> is with that that I ask if anyone has any good ideas or an established
> process that works well for this?
>
> Thanks,
>
> Bobby
>
> _______________________________________________
> ros-users mailing list
> ros-users@lists.ros.org
> http://lists.ros.org/mailman/listinfo/ros-users
>
>
_______________________________________________
ros-users mailing list
ros-users@lists.ros.org
http://lists.ros.org/mailman/listinfo/ros-users