Hi,
I ran into trouble with a simple network setup consisting of two computes connected via a switch. I noticed ros2 will only send data in case a gateway is set (the gateway address doesn't need to be reasonable - for example I just set it to the ip of the switch).
This leads me to the question. Why do I need to set a gateway?
---
[Visit Topic](
https://discourse.ros.org/t/no-communication-if-no-gateway-is-set/2915/1) or reply to this email to respond.
If you do not want to receive messages from ros-users please use the unsubscribe link below. If you use the one above, you will stop all of ros-users from receiving updates.
______________________________________________________________________________
ros-users mailing list
ros-users@lists.ros.org
http://lists.ros.org/mailman/listinfo/ros-users
Unsubscribe: <
http://lists.ros.org/mailman//options/ros-users>