Hi,
I have followed the instructions reported on
https://www.generationrobots.com/blog/en/2015/02/robotic-simulation-scenarios-with-gazebo-and-ros/ in order to create a model for a differential drive vehicle on Gazebo.
However even if I manually publish the commands of the hinges (e.g., for the left wheel hinge, rostopic pub -1 /mybot/leftWheel_effort_controller/command std_msgs/Float64 "data: 1.5") the respective wheel does not rotate and the robot remains still.
The code describing my robot is similar to the one reported in the tutorial.
Does anyone have any idea on how to solve this issue?
Thank you all.
---
[Visit Topic](
https://discourse.ros.org/t/gazebo-differential-drive-vehicle-model/3052/1) or reply to this email to respond.
If you do not want to receive messages from ros-users please use the unsubscribe link below. If you use the one above, you will stop all of ros-users from receiving updates.
______________________________________________________________________________
ros-users mailing list
ros-users@lists.ros.org
http://lists.ros.org/mailman/listinfo/ros-users
Unsubscribe: <
http://lists.ros.org/mailman//options/ros-users>
(text/plain)