Driving the motors is done by dedicated micro-controllers, at least in the systems I work with. Simple ones take velocities and perform PID control, better ones do Model-Predictive Control (MPC). Often, IMUs are also often directly attached, as they are cheap enough for a while now to be just integrated on the board. Of course, for MPC and for IMU integration some configuration is necessary, but not a lot.
I'm not sure what role MachineKit would play in such a setup. Would you use MachineKit to generate the software running on the micro-controller?
---
[Visit Topic](
https://discourse.ros.org/t/why-dont-we-use-ros/3161/16) or reply to this email to respond.
If you do not want to receive messages from ros-users please use the unsubscribe link below. If you use the one above, you will stop all of ros-users from receiving updates.
______________________________________________________________________________
ros-users mailing list
ros-users@lists.ros.org
http://lists.ros.org/mailman/listinfo/ros-users
Unsubscribe: <
http://lists.ros.org/mailman//options/ros-users>