I followed the instructions in 7.1.5 for Porting OpenCR1.0 to Arduino IDE. I want to reason through my issue. Im not familiar with Arduino checksum generation. I connected my OpenCR to my Remote PC. I ran the Arduino IDE from there and loaded the bootloader. So I assume I can load the OpenCR from any machine as long as I have the right bootloader version. Where and how are the checksums being generated and compared? Will I have the same bootloader checksum as everyone else in the world? If that is correct, someone should be able to tell me if I have the correct one and tell me which side is incorrect. If not correct, does the checksum depend on my hardware and/or software.
ed
---
[Visit Topic](
https://discourse.ros.org/t/turtlebot3-software-and-firmware-update-and-waffle-pi/3729/13) or reply to this email to respond.
If you do not want to receive messages from ros-users please use the unsubscribe link below. If you use the one above, you will stop all of ros-users from receiving updates.
______________________________________________________________________________
ros-users mailing list
ros-users@lists.ros.org
http://lists.ros.org/mailman/listinfo/ros-users
Unsubscribe: <
http://lists.ros.org/mailman//options/ros-users>
(text/plain)