I am struggling to make a general bill of material for the hardware required. But I don't progress at all. So I would like to ask for some advice.
My plan is to have a robot that can carry a larger weight (>1,5TO). For this project I assume that I need two motors to about 0.8kw/each, 380Volt, DC. And now comes the questions:
-what kind of motor do you use?
-how many sabretooth do I need (not clear which type)? In fact why do you use a pair of sabertooth? Or can be replace with something else?
-how many kangaroox2 do I need? This question is link with the previous one. Because this large equipment need many Ampers I need big batteries (I was thinking at some car batteries to 12 or 24 Volt). But than I need a converter, do I? In fact two: one from battery to kangaroo and one from sabertooth to motor, no?
-how many raspberrypi? Why do you have 2 raspberry? Probably to have a better computation, but how do you connect them? One is master and one is slave?
Other questions (cables, encoders, etc) remain for later after clarifying those
Thank you
Adrian
---
[Visit Topic](
https://discourse.ros.org/t/bennybot-build-an-autonomous-bot-to-deliver-my-garbage-to-the-curb/3896/4) or reply to this email to respond.
If you do not want to receive messages from ros-users please use the unsubscribe link below. If you use the one above, you will stop all of ros-users from receiving updates.
______________________________________________________________________________
ros-users mailing list
ros-users@lists.ros.org
http://lists.ros.org/mailman/listinfo/ros-users
Unsubscribe: <
http://lists.ros.org/mailman//options/ros-users>
(text/plain)