An interesting case study where real-time trajectory modification would have been helpful:
> For months, Tesla engineers struggled to get a robot to guide a bolt through a hole accurately to secure part of the rear brake. They found a maddeningly simple solution: Instead of using a bolt with a flat tip on its threaded end, engineers switched to a bolt with a tapered point, known as a lead-in, that can be guided through the hole even if the robot is a millimeter off dead center.
[
https://www.theverge.com/2018/6/30/17520832/tesla-model-3-manufacturing-changes-tent-robots-welds](
https://www.theverge.com/2018/6/30/17520832/tesla-model-3-manufacturing-changes-tent-robots-welds)
---
[Visit Topic](
https://discourse.ros.org/t/streaming-motion-interfaces/5858/6) or reply to this email to respond.
If you do not want to receive messages from ros-users please use the unsubscribe link below. If you use the one above, you will stop all of ros-users from receiving updates.
______________________________________________________________________________
ros-users mailing list
ros-users@lists.ros.org
http://lists.ros.org/mailman/listinfo/ros-users
Unsubscribe: <
http://lists.ros.org/mailman//options/ros-users>