Hello all,
I've been using MoveIt! to add an extra constraint during the collision checking process. To do this, I add a rectangular prism to the environment based on the position of the End Effector of my manipulator. I planned on adding the geometry by the method:
processCollisionObjectMsg()
I would call this method from:
void PlanningScene::checkCollision(const collision_detection::CollisionRequest& req,
collision_detection::CollisionResult& res,
const robot_state::RobotState& kstate) const
However, checkCollision is const and processCollisionObjectMsg() is not, and thus is uncallable. I am using OMPL (and the default fcl collision detection) to plan my paths. What is a good way for me add a simple rectangular prism into the collision environment ? Note, each rectangular prism should only apply to its respective sample; one sample's rectangular prism should not affect another sample's collision checking.
---
[Visit Topic](
https://discourse.ros.org/t/how-to-edit-planningscene-collision-checking-method-to-add-objects-to-the-environment/6083/1) or reply to this email to respond.
If you do not want to receive messages from ros-users please use the unsubscribe link below. If you use the one above, you will stop all of ros-users from receiving updates.
______________________________________________________________________________
ros-users mailing list
ros-users@lists.ros.org
http://lists.ros.org/mailman/listinfo/ros-users
Unsubscribe: <
http://lists.ros.org/mailman//options/ros-users>