**Specifications**: ROS Kinetic
ubuntu 16.04
Hi! I encountered a problem when I tried to connect two usb 2.0 cameras with autoware. It seems that autoware always just can recognize /dev/video0, which means autoware just can recognize one camera all the time. Is there someone who knows how to make autoware recognize another camera like /dev/video2 in my case? Autoware still can recognize one camera even after I deleted the contents of launch file in ros camera driver or the contents of uvc_camera.sh under /Autoware/ros/src/sensing/drivers/camera/usb, which makes me be stuck at the point where I do not know which file I should change so that two cameras can be used at the same time. I would appreciate it a lot if someone can help me figure this out. Please let me know if you need any details I left out here about this problem.
My ubuntu 16.04 system will show /dev/video0 and /dev/video1 when I just connect one camera to my computer. I guess that it is probably due to the microphone built in my usb camera.
---
[Visit Topic](
https://discourse.ros.org/t/connect-two-usb2-0-cameras-with-autoware/8013/1) or reply to this email to respond.
If you do not want to receive messages from ros-users please use the unsubscribe link below. If you use the one above, you will stop all of ros-users from receiving updates.
______________________________________________________________________________
ros-users mailing list
ros-users@lists.ros.org
http://lists.ros.org/mailman/listinfo/ros-users
Unsubscribe: <
http://lists.ros.org/mailman//options/ros-users>
(text/plain)