This is what I could find:
Lego NXT:
http://www.ros.org/wiki/nxt
P2OS/ARCOS:
http://www.ros.org/wiki/p2os (Pioneer uses ARCOS, afaik)
iRobot Create (Roomba):
http://www.ros.org/wiki/irobot_create_2_1 That is
Brown's pkg, I have used it personally, it works great, but there are others
also.
More importantly, ROS just provides a good foundation, regardless of what is
supported out of the box, some assembly will be required.
Hope that helps,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
William Woodall
Graduate Software Engineering
Auburn University
w@auburn.edu
wjwwood@gmail.com
256-345-9938
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
On Mon, Jul 19, 2010 at 12:15 AM, Arkapravo Bhaumik <
arkapravobhaumik@gmail.com> wrote:
> Hi Gonçalo
>
> Thanks for your reply.
>
> Just to inquire, robots as Pioneer, Khepera, Roomba and Mindstorms etc has
> been done in ROS, right ?
>
> Best regards
>
> Arkapravo
>
>
> 2010/7/17 Gonçalo Cabrita <goncabrita@gmail.com>
>
> Hi Arkapravo,
>>
>> I think the answer to your question lies in this tutorial:
>>
>> http://www.ros.org/wiki/navigation/Tutorials/RobotSetup
>>
>> Basically you'll have to design yourself the odometry source and the base
>> controller blocks represented in the diagram, which usually come in the same
>> ROS node (which you'll have to create for your own robot).
>>
>> If you are using a popular robot platform it is likely that someone has
>> already made that node for ROS.
>>
>> Best regards,
>>
>> Gonçalo Cabrita
>> ISR - University of Coimbra
>> Portugal
>>
>>
>>
>
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>