Hi Zhiping,
One quick and easy solution would be to just increase the decay time in RViz
to a higher value, for example 1000s or something, to retain visualization
of previous msgs.
Cheers,
Hozefa
On Wed, Sep 8, 2010 at 9:59 AM, #TAN ZHI PING# <
TANZ0066@e.ntu.edu.sg>wrote:
> Hi all,
>
> I tried to run this program in rivz.
>
> -------------------------------
> _Start_Program_---------------------------------
> sensor_msgs::PointCloud cloud;
> cloud.header.stamp = ros::Time::now();
> cloud.header.frame_id = "sensor_frame";
> cloud.set_point_size(NUM_POINT);
>
> //we'll also add an intensity channel to the cloud
> cloud.set_channels_size(1);
> cloud.channels[0].name = "intensities";
> cloud.channels[0].set_values_size(NUM_POINT);
>
> for(unsigned int i =0; i<num_points; ++i){
> cloud.points[i].x = 1 + count;
> cloud.points[i].y = 2 + count;
> cloud.points[i].z = 3 + count;
> cloud.channels[0].values[i] = 10
>
> cloud_pub.publish(cloud);
> ++count;
>
> -------------------------------------_End_program_-----------------------------------------------
>
> Although there is display on the RIVZ, the old data is always removed by
> the new data. What is the setting required to retain the data?
>
> With thanks,
> Zhiping
>
>
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>