I resolved the issue by changing /base_link in my odom, global/local costmaps
and an AMCL to /base_footprint
but i ended up at costmap timeout issue where my update frequency for odom
is sufficient to 20 Hz.
I get below warnings and the system consumes almost memory which slows down
it and further stack stops working.
[ WARN] [1284897268.190695314]: Costmap2DROS transform timeout. Current
time: 1284897268.1906, global_pose stamp: 1284897264.8979, tolerance: 0.3000
[ WARN] [1284897268.376979703]: Costmap2DROS transform timeout. Current
time: 1284897268.3768, global_pose stamp: 1284897264.8979, tolerance: 0.3000
[ WARN] [1284897268.390694847]: Costmap2DROS transform timeout. Current
time: 1284897268.3906, global_pose stamp: 1284897264.8979, tolerance: 0.3000
[ WARN] [1284897268.576989713]: Costmap2DROS transform timeout. Current
time: 1284897268.5768, global_pose stamp: 1284897264.8979, tolerance: 0.3000
[ WARN] [1284897268.791249198]: Map update loop missed its desired rate of
5.0000Hz... the loop actually took 0.2144 seconds
[ WARN] [1284897268.791455395]: Costmap2DROS transform timeout. Current
time: 1284897268.7913, global_pose stamp: 1284897264.8979, tolerance: 0.3000
[ WARN] [1284897268.791551263]: Costmap2DROS transform timeout. Current
time: 1284897268.5907, global_pose stamp: 1284897264.8979, tolerance: 0.3000
[ WARN] [1284897268.791641971]: Map update loop missed its desired rate of
5.0000Hz... the loop actually took 0.2011 seconds
[ WARN] [1284897268.791779039]: Costmap2DROS transform timeout. Current
time: 1284897268.7917, global_pose stamp: 1284897264.8979, tolerance: 0.3000
[ WARN] [1284897268.977008104]: Costmap2DROS transform timeout. Current
time: 1284897268.9768, global_pose stamp: 1284897264.8979, tolerance: 0.3000
[ WARN] [1284897268.990701445]: Costmap2DROS transform timeout. Current
time: 1284897268.9906, global_pose stamp: 1284897264.8979, tolerance: 0.3000
[ WARN] [1284897269.176973650]: Costmap2DROS transform timeout. Current
time: 1284897269.1768, global_pose stamp: 1284897264.8979, tolerance: 0.3000
[ WARN] [1284897269.190704075]: Costmap2DROS transform timeout. Current
time: 1284897269.1906, global_pose stamp: 1284897264.8979, tolerance: 0.3000
I had similar issue last time which was solved by updating frequency. I
tried this time but didnt work.
anyone has any solution?
- Prasad Dixit
--
View this message in context:
http://ros-users.122217.n3.nabble.com/Navigation-stack-not-working-tp1519053p1523711.html
Sent from the ROS-Users mailing list archive at Nabble.com.