Hi once more,
We actually just found out, that we can control the robot with player in the (default) direct_wheel_drive mode. If we set
direct_wheel_drive to 0 in the confguration file, the behaviour ist the same as with the ros node. Does anyone know, why the non-direct_wheel_drive might not work? Does the p2os on ROS support the direct_wheel_drive mode?
Thanks,
Georg Wichert
-----Original Message-----
From:
ros-users-bounces@code.ros.org [
mailto:ros-users-bounces@code.ros.org] On Behalf Of von Wichert, Georg
Sent: Wednesday, September 29, 2010 3:38 PM
To: User discussions
Subject: Re: [ros-users] Pioneer2DX does not move with p2os
Hi again,
Yes, we are shure (gdb and ROS_INFO()), that the command arrives at the p2os node ( check_and_set_vel() ) and that the commanded velocity is smaller than the configured maximum.
Best,
Georg Wichert
-----Original Message-----
From:
ros-users-bounces@code.ros.org [
mailto:ros-users-bounces@code.ros.org] On Behalf Of Enea Scioni
Sent: Wednesday, September 29, 2010 1:05 PM
To:
ros-users@code.ros.org
Subject: Re: [ros-users] Pioneer2DX does not move with p2os
Hi Georg,
just a simple question: did you check if you're sending the twist command to the right topic?
(use rxgraph or rostopic to check)
Enea Scioni
--
View this message in context:
http://ros-users.122217.n3.nabble.com/Pioneer2DX-does-not-move-with-p2os-tp1601584p1601652.html
Sent from the ROS-Users mailing list archive at Nabble.com.
_______________________________________________
ros-users mailing list
ros-users@code.ros.org
https://code.ros.org/mailman/listinfo/ros-users
_______________________________________________
ros-users mailing list
ros-users@code.ros.org
https://code.ros.org/mailman/listinfo/ros-users