Yup, that works. Thanks for your help.
-Jenny & Mario
On Wed, Nov 10, 2010 at 12:10 AM, Jenny Barry <
jlbarry@mit.edu> wrote:
> Thanks! We'll try this.
>
> -Jenny and Mario
>
> On Tue, Nov 9, 2010 at 7:00 PM, Peter Brook <pbrook@cs.washington.edu> wrote:
>> Hey Jenny and Mario,
>> I actually just came across this issue with our PR2 last night. I found that
>> starting the robot by running "sudo robot start" fails to find any
>> controllers created in my local directories. I had to "sudo robot stop" the
>> robot and then start it up with "roslaunch /etc/ros/robot.launch" to get the
>> system to find my custom controllers.
>> Hope this helps,
>> Peter
>>
>> On Tue, Nov 9, 2010 at 1:40 PM, Jenny Barry <jlbarry@mit.edu> wrote:
>>>
>>> Hi,
>>>
>>> We are trying to get a realtime controller to run on the PR2 robot. We
>>> have copied and pasted the "writing a realtime joint controller" tutorial
>>> and it works in simulation. However, the controller fails to register on
>>> the actual robot. It finds the controller_plugins.xml file but the
>>> pr2_controller_manager does not list MyControllerPlugin in the types. We've
>>> reloaded the libraries, remade things, and restarted the robot. Help?
>>>
>>> Thanks,
>>> Jenny and Mario
>>>
>>> _______________________________________________
>>> ros-users mailing list
>>> ros-users@code.ros.org
>>> https://code.ros.org/mailman/listinfo/ros-users
>>>
>>
>>
>> _______________________________________________
>> ros-users mailing list
>> ros-users@code.ros.org
>> https://code.ros.org/mailman/listinfo/ros-users
>>
>>
>