Thank you,
but this did not work either. If I use a normal hokuyo, without intensities it
works fine. I tink the problem is that it only has one reading and this collides
with the min_angle, max_angle and scan_time, somehow internally.
"Lorenz Mösenlechner" <
moesenle@in.tum.de> hat am 19. November 2010 um 13:41
geschrieben:
> Hi,
>
> I would try adding an intensity measurement.
>
> Lorenz
>
> >
> >
> > Dear all,
> >
> > I have te following problem: I want to display a single point laser
> > measurement
> > in RVIZ using LaserScan message. Terefor I filled most of the laser message
> > parameters manualle. The range was set by the laser
> > (Leuze ODSL-30)
> >
> > The message generated looks fine, but when i subscrive to the /scan RVIZ
> > refused
> > to display it.
> >
> > When I use rostopic echo, the message looks like this
> >
> >
> > =================================================================
> > ---
> > header:
> > Â seq: 144
> > Â stamp:
> > Â Â Â secs: 1290166306
> > Â Â Â nsecs: 126582347
> > Â frame_id: base_link
> > angle_min: 0.0
> > angle_max: 0.00999999977648
> > angle_increment: 0.00999999977648
> > time_increment: 0.10000000149
> > scan_time: 0.10000000149
> > range_min: 0.20000000298
> > range_max: 30.0
> > ranges: [3.4630000591278076]
> > intensities: []
> > ---
> > header:
> > Â seq: 145
> > Â stamp:
> > Â Â Â secs: 1290166306
> > Â Â Â nsecs: 226820561
> > Â frame_id: base_link
> > angle_min: 0.0
> > angle_max: 0.00999999977648
> > angle_increment: 0.00999999977648
> > time_increment: 0.10000000149
> > scan_time: 0.10000000149
> > range_min: 0.20000000298
> > range_max: 30.0
> > ranges: [3.4619998931884766]
> > intensities: []
> >
> > =========================================================
> >
> > Maybe the params angle_min: 0.0
> > angle_max: 0.00999999977648
> > angle_increment: 0.00999999977648
> > time_increment: 0.10000000149
> > scan_time: 0.10000000149
> >
> > are wrong (because I have only one scan in contrast to the hokuyo which has
> > multi scans per reading).
> >
> > I though also to use the RANGE sensor message but there seems no way to
> > display
> > it in RVIZ as well.
> >
> > Any Ideas?
> >
> > Cheers,
> >
> > Markus
>
> > ------------------------------------------------------------------------------
> > Beautiful is writing same markup. Internet Explorer 9 supports
> > standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 & L3.
> > Spend less time writing and rewriting code and more time creating great
> > experiences on the web. Be a part of the beta today
> > http://p.sf.net/sfu/msIE9-sfdev2dev
>
> > _______________________________________________
> > ros-users mailing list
> > ros-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/ros-users
>
> > _______________________________________________
> > ros-users mailing list
> > ros-users@code.ros.org
> > https://code.ros.org/mailman/listinfo/ros-users
>
>
> --
> Lorenz Mösenlechner | moesenle@in.tum.de
> Technische Universität München | Boltzmannstr. 3
> 85748 Garching bei München | Germany
> http://ias.cs.tum.edu/ | Tel: +49 (89) 289-17750
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users