Hi Josh,
The compile error was the follows.
error: no matching function for call to
'sensor_msgs::CvBridge::imgMsgToCv(sensor_msgs::Image&, const char [12])'
Best,
Soonhac
On 11/19/2010 01:18 PM, Josh Faust wrote:
> What was the compile error you got originally? That's not a valid
> cast to be making.
>
> There's a version of fromImage that just takes the sensor_msgs/Image
> -- are you sure that srv.response.left_image is a sensor_msgs/Image?
>
> Josh
>
> On Fri, Nov 19, 2010 at 12:49 PM, Soonhac Hong <soonhac.hong@gmail.com
> <mailto:soonhac.hong@gmail.com>> wrote:
>
> Hi all,
>
> I'm trying to convert sensor_msgs/Image to the opencv image. The
> sensor_msgs/Image is defined in the ros service as follows.
>
> <temp_srv.srv>
> bool isColor
> ----
> sensor_msgs/Image left_image
>
>
> The problem has happened at the following code.
>
> IplImage* left_image = bridge_.imgMsgToCv((const
> sensor_msgs::ImageConstPtr&) srv.response.left_image, "passthrough");
>
> Without the casting,(const sensor_msgs::ImageConstPtr&), there was an
> compile error. With the casting, there is a runtime error,
> segmentation
> fault. Is there anyone to know how to get the
> sensor_msgs::ImageConstPtr& of the sensor_msgs/Image which is
> defined in
> the ros service?
>
> I confirmed that there are the proper value of each pixel in the
> srv.response.left_image.data[] as well as
> srv.response.left_image.width
> and srv.response.left_image.hight.
>
> Thank you for any comments.
>
> Best,
> Soonhac
>
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org <mailto:ros-users@code.ros.org>
> https://code.ros.org/mailman/listinfo/ros-users
>
>
>
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>