Hi Koen,
These are the cameras I have VRMagic Multisensor Intelligent
Cameras<
http://www.vrmagic.com/imaging/cameras-framegrabber/multi-sensor-cameras/>
.
How would you suggest I proceed?
Thanks,
Adi
On Tue, Feb 15, 2011 at 5:59 PM, koen buys <
buys.koen@gmail.com> wrote:
> Hi Adi,
>
> What type of camera's do you use? We just included a patch in
> camera_drivers to allow for synchronized use of
> prosilica_cameras. My idea is also to expand my implementation to
> allow for a 'stereo' setup with multiple camera's.
> My setup typically has a larger baseline than PR2's.
>
> Koen
>
> On 15 February 2011 13:50, Adi Shavit <adishavit@gmail.com> wrote:
> > Hi,
> > I am new to ROS.
> > I have a 4 camera stereo set using 4 synchronized cameras that are not
> > supported by ROS.
> > This is not unlike what PR2 uses.
> > I would like to use these camera with ROS.
> > What is the best way to do this?
> >
> > Do I need to write my own "driver"? That is code that interfaces with the
> > camera APIs and publishes to ROS?
> > In that case, what do I publish? Do I give only raw image output or is
> there
> > a way to publish a stereo pair?
> > Are there any examples for how to do this, e.g. from some other stereo
> > cameras?
> > What is the easiest way to do this? As I said I am new to ROS.
> >
> > Thanks,
> > Adi
> >
> >
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>