Hello list,
i am trying to create an urdf description for the gripper in our crustcrawler AX18A arms.
My starting point for the urdf-file is the one i found for the crustcrawler-smart_arm in the ua-ros-pkg package, see
http://wiki.ros.org/ua-ros-pkg
but that has a gripper with two actuators.
The AX18A arm has a so called "2 in 1" gripper with one actuator, where the 2 fingers work in opposite direction, see
http://www.crustcrawler.com/products/AX-18F%20Smart%20Robotic%20Arm/
The question is, how do i describe that one actuator control both the left and right fingers of the gripper,
and make it show in rviz using the joint_state_publisher.
I've been looking into the velo-gripper that looks similar, but i can't find the crucial parts.
It probably has to do something with transmission?
Hopefully someone can give me a pointer in the right direction.
Thanks in advance,
Sietse
_______________________________________________
ros-users mailing list
ros-users@lists.ros.org
http://lists.ros.org/mailman/listinfo/ros-users