[ros-users] Running RVIZ

Ivan Dryanovski ivan.dryanovski at gmail.com
Wed Oct 20 13:36:50 UTC 2010


Shahmi,

You probably won't need to write any nodes. To visualize your data, you will
need a node to communicate with the laser driver and publish the scans, and
then rviz to visualize them. If your laser is a Hokuyo or a SICK, there is
support for them in the laser_drivers stack:

http://www.ros.org/wiki/laser_drivers

Ivan

On Wed, Oct 20, 2010 at 7:48 AM, Ugo Cupcic <ugo at shadowrobot.com> wrote:

>  Do you have a node publishing the cloud point?
>
> To run rviz, you just need to run:
> > rosrun rviz rviz
>
> You should have a look at: http://www.ros.org/wiki/rviz/UserGuide
>
> Cheers,
>
> Ugo
>
>
> On 20/10/10 12:45, shahmi wrote:
>
>   Hi all,
>
> I would like know, do we need to write a node in order to run RVIZ package.
> I actually want to visualize data  from laser scanner via RVIZ. Is it
> possible to run it even without any node written.
>
> Thanks in advance.
>
> Regards,
> Shahmi
>
> _______________________________________________
> ros-users mailing listros-users at code.ros.orghttps://code.ros.org/mailman/listinfo/ros-users
>
>
> --
> Ugo Cupcic         |  Shadow Robot Company | ugo at shadowrobot.com
> Software Engineer  |    251 Liverpool Road |
> need a Hand?       |    London  N1 1LX     | +44 20 7700 2487http://www.shadowrobot.com/hand/              @shadowrobot
>
>
> _______________________________________________
> ros-users mailing list
> ros-users at code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ros.org/pipermail/ros-users/attachments/20101020/1f2f146c/attachment-0003.html>


More information about the ros-users mailing list