[ros-users] Pioneer2DX does not move with p2os

von Wichert, Georg Georg.Wichert at siemens.com
Wed Sep 29 13:38:16 UTC 2010


Hi again,

Yes, we are shure (gdb and ROS_INFO()), that the command arrives at the p2os node ( check_and_set_vel() ) and that the commanded velocity is smaller than the configured maximum.

Best,

Georg Wichert

-----Original Message-----
From: ros-users-bounces at code.ros.org [mailto:ros-users-bounces at code.ros.org] On Behalf Of Enea Scioni
Sent: Wednesday, September 29, 2010 1:05 PM
To: ros-users at code.ros.org
Subject: Re: [ros-users] Pioneer2DX does not move with p2os


Hi Georg,
just a simple question: did you check if you're sending the twist command to the right topic?
(use rxgraph or rostopic to check)

Enea Scioni
--
View this message in context: http://ros-users.122217.n3.nabble.com/Pioneer2DX-does-not-move-with-p2os-tp1601584p1601652.html
Sent from the ROS-Users mailing list archive at Nabble.com.
_______________________________________________
ros-users mailing list
ros-users at code.ros.org
https://code.ros.org/mailman/listinfo/ros-users



More information about the ros-users mailing list