[ros-users] sensor_msgs Low Cost/Android review

Hassan Eldeeb ha.eldeeb at gmail.com
Tue Nov 13 15:53:47 UTC 2012


How can I get out of this mailing list ? :(



On Tue, Nov 13, 2012 at 5:51 PM, Armin Hornung <
HornungA at informatik.uni-freiburg.de> wrote:

> On 2012-11-13 16:47, Advait Jain wrote:
>
>> I agree with Shaun.
>>
>> My personal preference is for the message name to reflect the message
>> data type as opposed to what the message is used for.
>>
>> The topic name can then tell us whether the message is being used for
>> humidity or pressure.
>>
>>
>>
>
> +1, that's the same way I see it (and what I considered "best practice").
> The topic name can give you the semantics while the message gives you the
> syntax, i.e., just names what is stored in it (see e.g. PoseStamped or the
> "Empty" srv that is used for all kinds of tasks). Just call rename the
> fields "temperature", "illuminance", "fluid_pressure" etc to "value" and
> you have the same message definition.
>
>
>
> --
> Armin Hornung
> Humanoid Robots Lab, Albert-Ludwigs-Universität Freiburg
> Contact: http://www.informatik.uni-**freiburg.de/~hornunga<http://www.informatik.uni-freiburg.de/~hornunga>
>
>
> ______________________________**_________________
> ros-users mailing list
> ros-users at code.ros.org
> https://code.ros.org/mailman/**listinfo/ros-users<https://code.ros.org/mailman/listinfo/ros-users>
>



-- 
Best regards

-------------------------------------------------------------------
Hassan Abdugaleel Eldeeb
Instructor at Warajulaan Academy
Tanta University | Computer Engineering & Automatic Control dept.
Email: ha.eldeeb at gamil.com | hassan.eldeeb at recyclobekia.com
mob: 010 56 25 160
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ros.org/pipermail/ros-users/attachments/20121113/a1fac586/attachment-0004.html>


More information about the ros-users mailing list