Re: [ros-users] Pr2 Front Bottom Panel Removal

Hi,

Thank you for the help, that was exactly the confirmation we wanted. While
setting up the PR2, we made a mistake with the Wireless access point. We
needed to remove the front bottom panel to get at the Cradlepoint access
point in order to push the reset button. Everything is done and working
now.

Regards,
Adam

On Mon, Jun 21, 2010 at 5:13 PM, Melonee Wise <mwise@willowgarage.com>wrote:

> Can you take a picture o what you want to remove?
>
> -Melonee
>
> On Jun 21, 2010, at 4:34 PM, Adam Stambler <adasta@gmail.com> wrote:
>
> Hi,
>
> We are trying to remove the PR2 front Bottom Panel and want to make sure we
> are taking it off correctly. Are there screws securing the panel or does it
> just clip in? If there are screws, which screws on the outside belong to
> the panel? If there are clips, what is the best position pull/push in to
> remove the panel?
>
> Thank you for the help, in the future I will post these questions to the
> PR2-users mailing list.
>
> Regards,
> Adam Stambler
>
> On Mon, Jun 21, 2010 at 4:23 PM, Adam Stambler < <adasta@gmail.com>
> adasta@gmail.com> wrote:
>
>> Hello,
>>
>> We are trying to remove the PR2 front Bottom Panel and want to make sure
>> we are taking it off correctly. Are there screws securing the panel or does
>> it just clip in? If there are screws, which screws on the outside belong to
>> the panel? If there are clips, what is the best position pull/push in to
>> remove the panel?
>>
>>
>> Regards,
>> Adam Stambler
>>
>>
>>
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>