Abhy,
Glad things are working now. I think your marker-based approach seems
reasonable for pose initialization.
Hope all is well,
Eitan
On Fri, Feb 11, 2011 at 4:49 AM, abhy <
abhy.12354@gmail.com> wrote:
>
> Hello Eitan,
>
> Thanks for your help. I tried working on it on the other day. And found
> that
> i was not providing the cov. matrix to the initial pose. I took the help of
> rviz pose setting .cpp file and provided the same to it. It worked by
> showing pose array.
>
> Now as i said my plan is to attach a pattern on ceiling and position robot
> after completing a job approximately under the pattern. When the robot will
> restart again then it will detect the position by ar_pose pattern match and
> figure it out in the map. Here my pattern position is fixed, Z axis in
> robot
> is 0 but pattern will show z value due to height which then i will neglect
> and take only x and y w.r.t pattern to transmit initial position.
>
> I hope my approach is fine. I request you to help me in case of any
> suggestion or if i am wrong.
>
> -Abhy
> --
> View this message in context:
> http://ros-users.122217.n3.nabble.com/Move-base-fails-tp2369343p2473301.html
> Sent from the ROS-Users mailing list archive at Nabble.com.
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
(text/plain)