Thanks for the thoughts Arjun,
At the moment I have the headless ubuntu 11.10 on the beagleboard so no X
window. I'll just end up testing how many substantial nodes I can get
running nicely, but ultimately it's looking like these are just not suited
to be the main workhorse just yet.
On Fri, Jan 13, 2012 at 1:03 AM, Arjun Arumbakkam <
akarjun@gmail.com> wrote:
> Hi Kent,
> It depends on what linux distribution you are using on your board. If you
> use a full fledged Ubuntu distribution, your processor and memory is going
> to be loaded and there will be little room for other processes.
> That said, if you use a lightweight Ubuntu distribution such as Lxde with
> Lxdm, you could have room for more computation. We've used a Gumstix Overo
> board with lxde and lxdm to run a roscore, olsr with two wifi interfaces
> and a rosnode (with minor computation) and still found the X interface
> quite responsive. It could have handled some image processing as well, but
> we ran localization, planning, control and image processing nodes offboard
> on a beefy laptop like Damon suggested in his email. The Gumstix Overo uses
> an ARM Cortex A8 core with 512 MB, same as the beagleboard. You could go
> one up by using just a console image without X. That might give you more
> room for image processing, etc.
> -Arjun.
>
>
> On Fri, Jan 13, 2012 at 3:38 AM, Kent Williams <k3nt00@gmail.com> wrote:
>
>> It is our hope to make the robot a standalone unit, and therefore not
>> require any off board infrastructure. I know this is quite a vague
>> question, I'm really just looking to see if anyone has hit the wall big
>> time with the capabilities of these boards or if there is hope for leaning
>> them down enough and slowing down the update frequencies to get by. I have
>> been considering to attempt to use a decent android phone I have as the
>> image sensor and processing resource node using rosjava, since the vision
>> requirements are low. Then possibly the beagleboard or pandaboard would be
>> sufficient for hosting the rest.
>>
>>
>> --
>> Kent Williams
>>
>> k3nt00@gmail.com
>> (818)203-4394
>>
>> _______________________________________________
>> ros-users mailing list
>> ros-users@code.ros.org
>> https://code.ros.org/mailman/listinfo/ros-users
>>
>>
>
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>
--
Kent Williams
k3nt00@gmail.com
(818)203-4394
(text/plain)