I'm not sure on timing. The 9:40 sounds reasonable, but I'm sure we didn't
sync at 8am. There might have been an issue with the sync yesterday which
was fixed by the sync this morning. I think I saw some differences in the
Precise 64 output when syncing.
For buildfarm things configurations I recommend using shadow-fixed. It's
slightly less stable, but it's generally better to know earlier that things
are going to fail.
Tully
On Thu, Dec 20, 2012 at 5:03 PM, Brian Gerkey <
gerkey@osrfoundation.org>wrote:
> hi Tully,
>
> OK, that's good to know.
>
> But did you sync twice today? Because this happened to me during my
> own development this morning, around 8am, and again to one of our
> Jenkins builds, around 9.40am.
>
> In general, do you recommend our Jenkins builds hit the public repo or
> shadow-fixed?
>
> Btw, `apt-get update` had been done in both cases, right before the
> install attempt.
>
> brian.
>
> On Thu, Dec 20, 2012 at 4:55 PM, Tully Foote <tfoote@willowgarage.com>
> wrote:
> > Hi Brian,
> >
> > No it's not expected and I think you unfortunately hit during a sync. It
> > takes a few minutes for us to resync everything across. Also if we have
> > synced since you last updated you will get 404s when trying to install or
> > upgrade, until you next update.
> >
> > The status page is looking good: http://www.ros.org/debbuild/fuerte.html
> >
> > And a spot check of the raw files shows std-msgs is present and happy:
> > http://packages.ros.org/ros/ubuntu/pool/main/r/ros-fuerte-std-msgs/
> >
> > Tully
> >
> >
> > On Thu, Dec 20, 2012 at 4:40 PM, Brian Gerkey <gerkey@osrfoundation.org>
> > wrote:
> >>
> >> hi guys,
> >>
> >> Today I noticed something that has happened periodically in the past:
> >> I try to install something that depends on ROS packages and it fails
> >> because things are missing from the public ('ros') repo. If I switch
> >> to shadow-fixed, everything's good.
> >>
> >> Today, I found the following things missing:
> >>
> >> ros-fuerte-pr2-mechanism
> >> ros-fuerte-std-msgs
> >> ros-fuerte-common-msgs
> >> ros-fuerte-image-common
> >> ros-fuerte-geometry
> >> ros-fuerte-pr2-controllers
> >> ros-fuerte-geometry-experimental
> >> ros-fuerte-robot-model-visualization
> >> ros-fuerte-image-pipeline
> >>
> >> There's some pretty important stuff in that list. Is this expected? I
> >> would think that we'd want to be sure that such core packages are
> >> present in shadow-fixed before syncing to public.
> >>
> >> brian.
> >> _______________________________________________
> >> Ros-release mailing list
> >> Ros-release@code.ros.org
> >> https://code.ros.org/mailman/listinfo/ros-release
> >
> >
> >
> >
> > --
> > Tully Foote
> > tfoote@willowgarage.com
> > (650) 475-2827
>
--
Tully Foote
tfoote@willowgarage.com
(650) 475-2827
(text/plain)