Make sense, thanks for the explanation and advice!
brian.
On Thu, Dec 20, 2012 at 5:18 PM, Tully Foote <
tfoote@willowgarage.com> wrote:
> I'm not sure on timing. The 9:40 sounds reasonable, but I'm sure we didn't
> sync at 8am. There might have been an issue with the sync yesterday which
> was fixed by the sync this morning. I think I saw some differences in the
> Precise 64 output when syncing.
>
> For buildfarm things configurations I recommend using shadow-fixed. It's
> slightly less stable, but it's generally better to know earlier that things
> are going to fail.
>
> Tully
>
>
> On Thu, Dec 20, 2012 at 5:03 PM, Brian Gerkey <gerkey@osrfoundation.org>
> wrote:
>>
>> hi Tully,
>>
>> OK, that's good to know.
>>
>> But did you sync twice today? Because this happened to me during my
>> own development this morning, around 8am, and again to one of our
>> Jenkins builds, around 9.40am.
>>
>> In general, do you recommend our Jenkins builds hit the public repo or
>> shadow-fixed?
>>
>> Btw, `apt-get update` had been done in both cases, right before the
>> install attempt.
>>
>> brian.
>>
>> On Thu, Dec 20, 2012 at 4:55 PM, Tully Foote <tfoote@willowgarage.com>
>> wrote:
>> > Hi Brian,
>> >
>> > No it's not expected and I think you unfortunately hit during a sync.
>> > It
>> > takes a few minutes for us to resync everything across. Also if we have
>> > synced since you last updated you will get 404s when trying to install
>> > or
>> > upgrade, until you next update.
>> >
>> > The status page is looking good: http://www.ros.org/debbuild/fuerte.html
>> >
>> > And a spot check of the raw files shows std-msgs is present and happy:
>> > http://packages.ros.org/ros/ubuntu/pool/main/r/ros-fuerte-std-msgs/
>> >
>> > Tully
>> >
>> >
>> > On Thu, Dec 20, 2012 at 4:40 PM, Brian Gerkey <gerkey@osrfoundation.org>
>> > wrote:
>> >>
>> >> hi guys,
>> >>
>> >> Today I noticed something that has happened periodically in the past:
>> >> I try to install something that depends on ROS packages and it fails
>> >> because things are missing from the public ('ros') repo. If I switch
>> >> to shadow-fixed, everything's good.
>> >>
>> >> Today, I found the following things missing:
>> >>
>> >> ros-fuerte-pr2-mechanism
>> >> ros-fuerte-std-msgs
>> >> ros-fuerte-common-msgs
>> >> ros-fuerte-image-common
>> >> ros-fuerte-geometry
>> >> ros-fuerte-pr2-controllers
>> >> ros-fuerte-geometry-experimental
>> >> ros-fuerte-robot-model-visualization
>> >> ros-fuerte-image-pipeline
>> >>
>> >> There's some pretty important stuff in that list. Is this expected? I
>> >> would think that we'd want to be sure that such core packages are
>> >> present in shadow-fixed before syncing to public.
>> >>
>> >> brian.
>> >> _______________________________________________
>> >> Ros-release mailing list
>> >> Ros-release@code.ros.org
>> >> https://code.ros.org/mailman/listinfo/ros-release
>> >
>> >
>> >
>> >
>> > --
>> > Tully Foote
>> > tfoote@willowgarage.com
>> > (650) 475-2827
>
>
>
>
> --
> Tully Foote
> tfoote@willowgarage.com
> (650) 475-2827
(text/plain)