On Wed, Sep 22, 2010 at 9:18 AM, John Browning <
john_jsb@hotmail.com> wrote:
> I'll experiment some more tonight. It was set at .25 deg increments 100deg
> scan angle at 500,000bps. the tutorial has a setting of .5 and 180 deg and
> 38,400bps i'll try that see if it clears up.
The baud rate shouldn't make a difference. But the angular resolution
might. That device naturally samples in 1-degree increments. To get
higher resolution, it takes multiple scans, offset from each other,
and interlaces them. Perhaps the driver is doing something wrong with
interlaced scans.
brian.