Dear all,
I have te following problem: I want to display a single point laser measurement
in RVIZ using LaserScan message. Terefor I filled most of the laser message
parameters manualle. The range was set by the laser
(Leuze ODSL-30)
The message generated looks fine, but when i subscrive to the /scan RVIZ refused
to display it.
When I use rostopic echo, the message looks like this
=================================================================
---
header:
seq: 144
stamp:
secs: 1290166306
nsecs: 126582347
frame_id: base_link
angle_min: 0.0
angle_max: 0.00999999977648
angle_increment: 0.00999999977648
time_increment: 0.10000000149
scan_time: 0.10000000149
range_min: 0.20000000298
range_max: 30.0
ranges: [3.4630000591278076]
intensities: []
---
header:
seq: 145
stamp:
secs: 1290166306
nsecs: 226820561
frame_id: base_link
angle_min: 0.0
angle_max: 0.00999999977648
angle_increment: 0.00999999977648
time_increment: 0.10000000149
scan_time: 0.10000000149
range_min: 0.20000000298
range_max: 30.0
ranges: [3.4619998931884766]
intensities: []
=========================================================
Maybe the params angle_min: 0.0
angle_max: 0.00999999977648
angle_increment: 0.00999999977648
time_increment: 0.10000000149
scan_time: 0.10000000149
are wrong (because I have only one scan in contrast to the hokuyo which has
multi scans per reading).
I though also to use the RANGE sensor message but there seems no way to display
it in RVIZ as well.
Any Ideas?
Cheers,
Markus------------------------------------------------------------------------------
Beautiful is writing same markup. Internet Explorer 9 supports
standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 & L3.
Spend less time writing and rewriting code and more time creating great
experiences on the web. Be a part of the beta today
http://p.sf.net/sfu/msIE9-sfdev2dev_______________________________________________
ros-users mailing list
ros-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ros-users