[ros-users] Fuerte install notes - turtlebot

[Bill Phillips]

Also, I apparently can't spell "turtlebot" consistently. Sheesh..

 

Bill

 

From: ros-users-bounces at code.ros.org [mailto:ros-users-bounces at code.ros.org]
On Behalf Of Bill Phillips
Sent: Tuesday, July 31, 2012 9:23 PM
To: ros-users at code.ros.org
Subject: [ros-users] Fuerte install notes - turtlebot

 

Attached are some rough notes I made about a clean install of Fuerte on a
Turtlebot and a developer workstation. I am using a turtlebot with the
Lenovo x130e laptop so this is specific to that setup.

I apologize in advance for not attributing the information correctly, as
most of it was pulled from ROS.org or it's peers (answers.ros.org, etc.)
during my installation and testing. This is still in rough draft form but I
wanted to get it out there to see if it was helpful or not. I intend a more
complete draft with proper attribution in the near future.

I can say from my little experience with ROS and the turtlebot that fuerte
is easier to set up and rviz is leaps and bounds above what it was in
electric. Well, at least for me. :)

Thanks in advance for taking a look at this.

Bill

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ros.org/pipermail/ros-users/attachments/20120731/303ee18d/attachment-0004.html>