[ros-users] large inflation_radius and rviz
Eric Perko
wisesage5001 at gmail.com
Mon Sep 6 17:27:54 UTC 2010
Christian,
Take a look at this thread:
http://ros-users.122217.n3.nabble.com/Costmap2D-Inflation-Radius-Maximum-td842808.html
Basically, RVIZ only draws up to the inscribed radius of the robot, which is
independent of the inflation radius.
- Eric
On Mon, Sep 6, 2010 at 12:45 PM, Christian Verbeek <
verbeek at servicerobotics.eu> wrote:
> I found that if I use an inflation_radius > 0.55 (the default in in
> costmap_2d) the inflated obstacles are displayed in rviz as if I used 0.55.
>
> I set the inflation_radius to 1 and see no difference in rviz compared
> to 0.55. The robots behaviour seems to honour the 1.
>
> _______________________________________________
> ros-users mailing list
> ros-users at code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ros.org/pipermail/ros-users/attachments/20100906/3b4be16b/attachment-0003.html>
More information about the ros-users
mailing list